ZTW
PROMO ZTW GECKO SERIES 85A BRUSHLESS ESC W/ 8A ADJUSTABLE SBEC
ZTW GECKO SERIES Airplane/Heli ESCs are competition-grade speed controllers from one of the most trusted RC electronics manufacturers in the industry. NEW FEATURES found in Gecko Series ESCs include PC data logging, firmware upgradability, and an 8A SBEC adjustable up to 8.4v to help your HV servos reach their fullest potential! Best of all, Gecko Series ESCs come standard with the ZTW quality, performance, and reliability you have come to trust.
The high power SBEC found in ZTW Gecko Series ESCs has been specifically designed for extreme aerobatics and therefore has the capability to support the higher momentary peak demand loads to eliminate the possibility of unwanted shutdowns, and is also capable of supporting continuous simultaneous multiple servo operations typically found in CCPM equipped hardcore 3D E-helicopters.
- Data logging via PC interface (optional accessory included with program card)
- Firmware upgradable via PC interface
- High SBEC current output: 8A continuous, 16A burst
- Adjustable SBEC voltage up to 8.4v for optimum performance from HV servos
- Extremely low internal resistance
- Smooth and accurate throttle linearity
- Power arming protection, over-heat protection, low-voltage protection and lost signal protection
- Supports high RPM motors
- Advanced governor mode and soft start
- Optional programming card & PC USB interface available
- Output: 85A continuous, 100A burst for 10 seconds
- Input voltage: 2-6s LiPo; 5-18 cell Ni-XX
- SBEC output: 5.0v / 6.0v / 7.4v / 8.4v adjustable @ 8A (switching)
- Weight: 74g
- Dimensions: 66 x 33 x 16mm
Programmable Options:
- Brake setting (off / soft / mid / hard -- default: off)
- Battery type: (Ni-XX / LiPo / LiFe -- default: LiPo auto detect)
- Cut-off voltage threshold (2.8V 50% / 3.0V 60% / 3.2V 65% / No protection -- default: 3.0V 60%)
- Factory default setup reset
- Timing settings (auto / 2° / 8° / 15° / 22° / 30° -- default: auto)
- SBEC Voltage Output (5.0v / 6.0v / 7.4v / 8.4v -- default: 5.0v)
- Governor mode: (RPM off / 1st Soft Start / 2nd Soft Start / Gov Mode 1 / Gov Mode 2 -- default: RPM off)
- Motor rotation: (forward / reverse -- default: forward)
- Start up (Low / Mid / High-- default: 30%)
- LVC cut-off type: (reduce gradually / cut-off -- default: reduce gradually)
Click here to download the ZTW GECKO Series ESC Programming Manual