X fly
XFly B-1B Lancer 2x70mm EDF jet PNP (Integrated Gyro)
New 3d extra time selected
XFly B-1B Lancer 2x70mm EDF JET PNP
DescriptionThe B-1B Lancer model is a detailed replica of the legendary B-1B Lancer strategic nuclear bomber flown by the US Air Force. With 8 usable channels, including Aileron, Elevator, Throttle, Rudder, Gear, Flaps, Spread Wings and a reverse thrust option, this model offers full control over all of its flight systems. The large functional scale swept wing is designed for optimized high speed and low speed flight, combined with the 70mm "Galaxy-X7" 12-blade EDF system, achieves excellent performance and almost instantaneous accelerations. Collapsible metal undercarriages absorb impact, sequenced undercarriage doors, LED navigation and landing lights fitted, add to the realism of the model. Working flaps improve take-off and landing while integrated wing connectors make it easy to install or remove the main wings. The model is quick and easy to assemble, requires no glue, and includes a 3-axis stabilization system for improved stability and control. Durable EPO foam construction makes this model both lightweight and impact resistant.
Features
- Twin powerful 6S-compatible inrunner motors with 12-blade 2x70mm fan deliver excellent top speed and vertical performance
- Fits 6S 5000-6000mAh batteries which will provide a wide range in performance and flight times
- Fast and precise factory-installed digital servos with ball-link equipped linkages for accurate movements
- Strong CNC metal landing gears with shock absorbing
- 5 retracts
- LED landing lights on front strut
- 3-axis gyro integrated into the main circuit with On/Off switch
- Lightweight yet strong and durable EPO construction
Technical Specifications
- Wingspan: 1766mm / 69.5in (extended) - 1140mm / 44.9in (retracted)
- Length: 1920mm / 75.6in
- Wing load: 130g/dm²
- Wing Area: 37dm²
- Flying weight: around 5000g
- CG: 48mm from the leading edge
- EDFs: 2x70mm 12-blade EDF (Galaxy X-7 6S version)
- Motors: 2x Brushless Inrunner 3060-KV2200
- ECSs: 2x80A
- Servos: 1x25g - 3x13g - 5x9g Digital
- 3 axis Gyro
- Ailerons: Yes
- Elevator: Yes
- Rudder: Yes
- Flaps: Yes
- Retractable CNC Metal Landing Gear
- Retract: 5 pcs
- LED Landing lights
- Recommended Radio: 6 channel
- Recommended environment: Outdoor
- Flying time: Approx. 5-8 minutes
- Takeoff/Landing: runway or short grass
- Mounting duration: around 20minutes
- Required
- 6-Channel radio transmitter
- 6-Channel receiver
- Gens ace 6-Cell 22.2V 5600-mAh 80C
- 6-Cell compatible battery charger
| ype of kit: | PNP |
| Wingspan (mm): | 1776mm/69.9in extended, 1140mm/44.9in retracted |
| Length (mm): | 1920mm/75.6in |
| Flying weight (gr) | around 5000g |
| Wing Surface Area: | 37dm² |
| Wing Loading: | approx. 130g/dm² |
| CG (Center of Gravity) | Check manual |
| Servos | 9g servos x 5, 13g servos x 3, 25g servo x 1 |
| Servo type: | Digital |
| EDF Diameter Class (mm): | 2 x 70 |
| Blades: | 12 |
| Turbine shroud | Synthetic |
| EDF Rotor | Synthetic |
| Power System | 2x Brushless 3060-KV2200 |
| Turns/min/Volt (Kv): | 2200 |
| Motor Type: | In-Runner |
| Motor Diameter (mm): | 30 |
| Electronic Speed Control | 2 x 80A BEC 10A |
| Battery Type | LiPo-Accu |
| Battery Cells: | 6s - 22.2v |
| Battery Capacity (mAh) | 5.000 mAh, 6.000 mAh |
| Connection: | XT90 |
| Surfaces | Ailerons, Elevator, Rudder, Flaps |
| Landing Gear | Retractable suspended gear |
| Lights | Landing light |
| Material | EPO Foam |
| Build time | 1/2 hour |
| Required Radio | 6 channels minimum |
| Recommended pilot skill level | Beginner, Intermediate |
Click here for the instruction manual
We offer several setups for Jeti and Spektrum
Building , adding formation lights , setup service possible
Email us for further information
3dextratime@telenet.be
