We ship from Belgium throughout Europe.
Cart 0
Freewing F-14 Tomcat Twin 80mm EDF Jet



Freewing F-14 Tomcat Twin 80mm EDF Jet ARF +



This is the KIT+ version for pilots who wish to install their own power system. All primary electronics including servos and landing gear come pre-installed, just add your own power system (EDF, motor, and ESC) to begin flying.

We  are proud to announce our Super Scale F-14D Tomcat! Never before has an electric F-14 been produced in this size and with this high a degree of scale fidelity and quality. Easily one of the most beloved jets in history, we’re especially excited to offer this thrilling F-14D Tomcat. Our team worked tirelessly to develop an RC model which brings the excitement and scale performance of this hallmark aircraft to your local flying field and to appropriately honor the F-14 Tomcat’s rightful place in aviation history. We chose to depict “Bullet 101”, the specially marked F-14D from the VF-2 squadron “Bounty Hunters”, which was painted in the mid-1990s to celebrate the 25th anniversary of the F-14’s service in the United States Navy.
The signature feature of the real F-14 is its sweeping wing, and we've worked to design this model around this function as well. Our lightweight, aluminum “Wing Box” design supports a rigid wing in both forward and swept configurations. The wings pivot on flat bearings to reduce resistance and wear. Electric servoless actuators extend and sweep the wings using steel control rods and brass ball links. The result of this design is a durable, maintenance-free wing sweep feature which provides pilots with a worthy F-14 flying experience.
Scale fidelity, surface details, and builder-friendliness were also specific areas of focus. The ARF PLUS model arrives with the main fuselage assembled. All the electronics –servos, retracts, and lights—are completely installed at the factory.  You will simply need to add your own power system and ESC. The builder simply needs to screw on the wings and epoxy on the forward nose section and the assorted surface details like the wing fences, antennas, pitot tube, etc. To further simplify the wiring and setup, this F14 incorporates an onboard mixing circuit board which controls all the servos, taileron/aileron mixing, wing sweeping, and the lighting package.
While the complexity of this F-14D make it the largest, most impressive, and heaviest EDF jet available to date, the aircraft uses two 80mm 12 blade EDFs and two 6s 4000mAh batteries (not included) which can propel it through the sky at 100mph. The Freewing F-14 is also extremely capable and stable at slow flight. The model can cruise at 60% throttle, can turn at 40% throttle even with the wings swept rearward, and can land at less than 40mph with full flaps.

    Model officially licensed by Northrop Grumman
    Rigid aluminum wing box assembly for a swept wing configuration
    Pre-installed servoless actuators to sweep the wing during flight
    Super scale details include hand painted pilots, antennas, pitot tubes, etc
    Proudly displaying the authentic "Bullet 101" livery of the VF-2 squandron "Bounty Hunters"
    Electronic retractable landing gear with all metal shock-absorbing struts
    Steerable, shock absorbing nose gear for enhanced ground maneuverability
    Carbon spars and EPO foam construction provide the perfect balance between strength and flexibility
    9x LED lights plus landing light (see manual for configuration options)
    Nylon hinges on all control surfaces (superior to foam hinges)
    Gapless flap hinges
    Removable magnetic nose cone for convenient transport

    Freewing F-14 Tomcat EPO 1550mm KIT+

    Brushless motors, EDF units, and ESCs 
    7 Channel Radio 
    7 Channel Receiver 
    TWO 6 Cell 22.2V 4000 mAh LiPo Batteries with EC5 connectors 
    6 Cell Compatible Battery Charger

Product Specifications:
Wingspan 1016mm retracted 1550mm extended / 40in retracted 61in extended
Length 1498mm / 59in
Weight 4160g without battery / 147oz
CG (Center of Gravity)  393mm measured back from the intake
Power System 2x 3530-1750kV Brushless Outrunner Motor
Electronic Speed Control 2x 80A ESCs, 8A UBEC, EC5 Connector
Propeller / EDF 2x 80mm Metal EDF with 12 Blade Fan
2x 9g servos (steering, nose gear door)
5x 17g metal gear servos (starboard elevator, starboard aileron, port aileron, port flap, starboard rudder)
3x 17g metal gear reverse servos (starboard flap, port elevator, port rudder)
Landing Gear  Electronic retractable main gear and steerable nose gear with all metal shock absorbing struts

Required Battery
2x Gens Ace 6S 22.2V 4500mah 60c

Required Radio
7+ Channel full range 2.4Ghz (using pre-installed mixing board)
Ailerons Yes
Elevator Yes
Rudder Yes
Flaps Yes
Lights Yes (landing light, 9x LEDs)

Hinge Type
Nylon gapless hinges
Material  EPO Foam
Skill Level  Advanced/Expert
Build Time  2 Hours
Recommended Environment  Minimum 300 foot runway, recommended pavement, mat, or short turf


Share this Product

More from this collection